 My SPA3000 isn't properly disconnecting the PSTN line
|
| The SPA3000 will try to detect disconnect from PSTN line by way of polarity reversal or disconnect tone (defaulted to US PSTN spec).
If the above is failed to be detected due to special connection to devices such as PBXs or connection to other coutries PSTN, then the disconnect will fallback on "Long Silence" timer value.
| Contributors: |
Created by eric, August 10th, 2007 at 05:33 AM
Last edited by eric, August 10th, 2007 at 05:33 AM
0 Comments
, 1162 Views
| | | |
Similar Threads for: My SPA3000 isn't properly disconnecting the PSTN line 
Linear Mode
