Contents

1Objectives 2Requirements 3Linksys SPA3102 Setup 3.1Network 3.2Voice 4CommuniGate Pro Setup 5SIP Client Setup 5.1X-Lite 5.2Twinkle 6Documentation

[top]Objectives

This document intend to present how to configure the Linksys SPA3102 device in order to be able to receive incoming calls on CGPro domain account or PBX application and to place calls on PSTN through the SPA3102 from a CGPro SIP account.

Setup will also allow to use a standard phone plugged to the SPA3102 to receive and place calls as well.

[top]Requirements

The local infrastructure in the scope of this document is composed of a network infrastructure allowing the SPA3102, the CGPro server and the host running the SIP Clients to communicate on the same LAN. The SPA3102 will not be used to enable access to the internet, it will be considered as a simple PSTN gateway on the LAN.

The SPA3102 device is connected to a standard analogical phone, RJ11 connected to the PHONE port (Line 1) of the SPA3102. The Line port (PSTN Line) is connected to your analogical phone line.

Limits

Routing or firewalling issues between different hosts of the infrastructure are out of the scope of this document. All setup is made for hosts on the same LAN.

This document does not include SIP DNS records details to route SIP calls between the devices. All routing is configured in devices and applications using devices IP only.

The SPA3102 supports VoIP connections through gateways to external VoIP providers. The related setup to enable this features is not described in this document. Also, SIP Gateway setup is quite straightforward and Dial Plan syntax understandable with some documentation provided at the end of this document.

This setup has been validated with:

• Freebox V3/4 for RJ11 analogical to VoIP gateway;
• Linksys SPA3102 - Software version 3.3.6(GW), Hardware version 1.3.5(a);
• CommuniGate Pro 5.1.12;
• X-Lite 2.0;
• Twinkle 1.0.

[top]Linksys SPA3102 Setup

[top]Network

Once you did connect for the first time the SPA3102 to the LAN using the RJ45 port called "Ethernet", mount some of your computer in the 192.168.0.0/25 network (not the 192.168.0.1 which is currently used by the SPA3102) and access the url http://192.168.0.1/ to manage the SPA3102.

You're able to configure the SPA3102 via the phone plugged to the Phone RJ11 port as well using **** to call the voice configuration menu. Consult the end of the "SPA3102 User guide" at the end of this procedure to get key code details.

1. Go to the Admin advanced page of the SPA3102.
2. Click on the "LAN Setup" tab and if not required, disabled the DHCP server and affect a "LAN IP address" with the appropriate "LAN Subnet Mask". Please note the DHCP server is enabled by default and you may better boot all your DHCP hosts clients before the SPA3102 to be up or some of your hosts may get broken DHCP configuration answer to their DHCP requests. I noticed as well the SPA3102 don't like to have both network interfaces "LAN" and "WAN" in the same network: the "LAN" interface do not answer ICMP request anymore.
3. Click on the "WAN Setup" tab and change the "Remote Management", Enable WAN Web Server parameter to "yes" and "Submit All Changes".
4. Still on the WAN Setup tab: please document local IP "Connection Type" and required details in order your SPA3102 RJ45 port ("Internet") to be available on your LAN and "Submit All Changes".
5. If the RJ45 Internet port was not yet connected, you can switch the RJ45 cable from the "Ethernet" to the "Internet" port and connect to the SPA Web Interface through the IP you did affect to your device (SPA3102-IP within this document): http://SPA3102-IP:port/admin/advanced

[top]Voice

First, we'll make sure the device is working correcly with our PSTN local details.

1. Click on the "Admin-Advanced-Voice" tab and go the the "Line 1" sub menu. Change the "Dial Plan" to: (S0<:@gw0>) and "Submit All Changes".
2. Use the phone plugged to the RJ11 "Phone" port an try to place a call.
3. Call from any PSTN device to your local phone number to see if you can receive the call.

Now your PSTN gateway looks to be working, we can configure the "PSTN Line" sub menu:

1. In the "Proxy and Registration" section, you may change "Make Call without Reg" and "Ans Call Without Reg" from "no" to "yes". I noticed both of these options to be inverted with my SPA3102 software release or I just understood the oposite of this options details...
2. In the "Dial Plans" section, "Dial Plan 1" should be (xx.) and please setup "Dial Plan 8" to (SO:some cgpro account@CGPro-IP:5060>).
3. In the "VoIP-To-PTSN Gateway Setup" section, set "VoIP-To-PSTN Gateway Enable" to "yes", "VoIP Caller Auth Method" to "HTTP Digest".
4. In the "VoIP Users and Passwords (HTTP Authentication)", document the "VoIP User 1 Auth ID" and "VoIP User 1 Password" and the "VoIP User 1 DP" to "1" . This login/passwd details will be used by CGPro to authenticate to the SPA3102 device.
5. In the "PSTN-To-VoIP Gateway Setup", change if options are not already correctly configured "PSTN-To-VoIP Gateway Enable" to "yes", "PSTN Caller Auth Method" to "none", "PSTN Ring thru line 1" to "no" if you want to disabled you phone to ring on incoming PSTN calls, "PSTN CID for VoIP CID" to "yes" and "PSTN Caller Default DP" to "8".

[top]CommuniGate Pro Setup

We are now going to prepare CGPro to be able to receive and place call through the SPA3102. We are going to tell CGPro to act as a relay within SIP communications in order to troubleshoot SIP transactions.

1. In the "Settings->Real-Time->SIP->Sending" tab, change "Transport-> Log Level" to "All info", "Client Transactions->Log Level" to "All info" and "Protocol->Force Dialog relaying", "Timer B" to "5 sec".
2. In the "Settings->Real-Time->SIP->Receiving" tab, adjust the "Transport->Enqueuers" to a confortable value based on the tests you intend to do. You may change "Log Level" for the "Transport" and "Server Transaction" to "All info" as well.
3. If you intend to change the SIP port of the CGPro listener, please modify the "Dial Plan 8" on the "PSTN Line" tab of the SPA3102 in order the same port to be used to manage incoming PSTN calls forwarded by the SPA3102 to CGPro.

On the CGPro "User" settings, we need to configure a CGPro domain to use our PSTN gateway. Click on the domain of your choice in the domain list. Please make sure the SIP service will be available for this domains and accounts you want to use it. Let's create a bpx account in order to define a specific PBX environment for this domain.

1. In the "Domain Settings" of the domain you're intended to use for the SIP service, setup your CGPro-IP, as a domain alias.
2. Create the "pbx" account with "200" and "conference" aliases. Make sure this account has "Cann Access All Files" and "Can Impersonate" "Access Rights" in the "Object" section. Create a "Real-Time->Incoming Call Rules" as the one documented in the "pbx" account of your main cgpro domain.
3. In the "Account Defaults->PSTN" tab of the domain you choosed, please change "Gateway Domain" and "Gateway Address" to "SPA3102-IP:5061", "Name for Gateway" with the "VoIP User 1 Auth ID" and "Password for Gateway" with the "VoIP User 1 Password" you did setup in the SPA3102 "PSTN Line", "VoIP Users and Passwords (HTTP Authentication)" section.

We assume SIP users to use international phone numbers extensions (+country_code number). We need to setup routing rules for outgoing and incoming PSTN calls.

1. Calls to the PSTN have to be forwarded to the 'gatewaycaller' PBX application: S:<+*@pstn> = gatewaycaller{00*}#pbx@CGPro-IP
2. Incoming calls from the PSTN network are coming from PSTNnumber@SPA3102-IP:5061 may be domain masquareded in order users to see PSTNnumber@your cgpro domain in their caller list allowing them to dial back easily. This feature or workaround is not yet documented here.

[top]SIP Client Setup

[top]X-Lite

Here are the standard settings I did use with xtensoftphone:

System Settings - SIP Proxy - Default

• Enabled: yes
• Username: cgpro sip user account
• Password: cgpro sip user password
• Domain/Realm: your cgpro domain
• SIP Proxy: CGPro-IP
• Out Bound Proxy: CGPro-IP
• Use Outbound Proxy: Always
• Send Internal IP: Default
• Register: Default

[top]Twinkle

Here are the standard settings I did use with twinkle:

SIP account

• User name: cgpro sip user account
• Domain: your cgpro domain

SIP authentication

• Realm: your main cgpro domain
• Authentication name: cgpro sip user account@your cgpro domain
• Password: cgpro sip user password

SIP server

• Registar: CGPro-IP
• Use outbound proxy: clicked
• Outbound proxy: CGPro-IP

[top]Documentation

A lot of people were looking for some consistent documentation about the Linksys SPA3102. I found some paper on some obscure path of the Internet. It describes most of the advanced options on the device, really useful. So, you can download this document here. And please take a look as well to the standard SPA3102 User Guide.

CGPro online documentation always available with your product release: https://yourmain-cgpro-domain:9010/Guide/.

A version of this how-to originally appeared on the Freddy Frouin web site and is used here with permission.