[top]SPA Power/Status LED Blink Definitions | State | Description | | ON | LED remains solid on | | OFF | LED remains solid off | | LONG (Long On) | 3.0s on, 1s off continuously FAST 0.125s on, 0.125s off continuously | | SLOW | 0.5s on, 0.5s off continuously | | VSLO (Very Slow) | 1.0s on, 1.0s off continuously | | HB (Heart Beat) | 0.1s on, 0.1s off, 0.1s on, 1s off continuously | | HB2 (Heart Beat 2) | 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 1.2s off continuously | | ERR0 (Error 0) | 0.5s on, 0.3s off, 0.1s on, 0.1s off, 0.1s on, 2s off continuously | | ERR1 (Error 1) | 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 2s off continuously | | ERR2 (Error 2) | 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 0.2s off, 0.5s on, 2s off continuously | | SOS | 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.5s on, 0.2s off, 0.5s on, 0.2s off, 0.5s on, 0.2s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 0.1s on, 0.1s off, 2s off continuously3short-3long-3short |
[top]SPA Power/Status LED Error Codes | LED Blink Rate | Description | Handset Behavior | Error Status Code | | SLOW | System InitializingSilent | 0000 | | OFF | Normal Operation: Both Lines on hookNormal | 1000 | | ON | Normal Operation: Either line off hookNormal | 1001 | | SLOW | Downloading new firmwareSilent | 1100 | | FAST | Writing firmware to flashSilent | 1101 | | SLOW | Looking for DHCP ServerSilent | 2000 | | ERR1 | SPA is using last known good IP (backup IP)Normal | 2001 | | ERR2 | IP Address ConfilictSilent | 2002 | | SLOW | No DHCP ServerSilent | 2999 | | SLOW | Unknown DHCP ErrorSilent | 2999 | | ERR0 | No Ethernet Link Detected ErrorSilent | 5000 | | SOS | Firmware Corrupted - Use SPA Recovery Tool to fixSilent |
Note: The Link LED will blink on transmit and receive (TX/RX) of packets. The LED will display solid off if no link is available. The LED will display solid on if link is up but no TX/RX activity is present.
| Contributors: |
Created by eric, September 16th, 2007 at 02:47 AM
Last edited by eric, September 16th, 2007 at 02:47 AM
0 Comments
, 1942 Views
| | | |
Similar Threads for: Linksys (Sipura) SPA Status Lights Definitions 
Linksys (Sipura) SPA Status Lights Definitions
Linear Mode
