Even on a locked SPA, you can get and set a variety of information via the Interactive Voice Response system (IVR). To get to this menu, pick up your handset and push the star key four times.
| Code | Description |
| 100# | DHCP Client status (i.e. whether or not unit obtains IP via DHCP) |
| 101# | Change DHCP Client (1 to enable, 0 to disable) |
| 110# | Announce IP address of your Sipura |
| 111# | Assign Sipura a static IP address. Enter the IP address, replacing dots in IP with the star key, and terminating with #. For example, the IP address 192.168.0.10 would be entered as 192*168*0*10# |
| 120# | Announce Netmask of your Sipura |
| 121# | Set netmask of Sipura, similar to static IP above. For example, the netmask 255.255.255.0 would be enetered as 255*255*255*0# |
| 130# | Announce Default Route of your Sipura |
| 131# | Set default route, similar to static IP above. For example, the route 192.168.0.1 would be entered as 192*168*0*1# |
| 150# | Gives firmware version |
| 732668# | Reboot the Sipura |
Similar Threads for: How do I access the Linksys SPA configuration from my handset? 
How do I access the Linksys SPA configuration from my handset?
Linear Mode
