[top]Problem

Despite several attempts I can't access the Web Configuration Menu for the LAN port at http://192.168.2.1, although it has been entered through the IVR prompt. Switiching to the WAN port and entering this same address or another one from my local network doesn't work either.

[top]Solution

The WAN side http access is disabled for security reasons, though it can enable it from LAN side on the configuration page. 192.168.0.160 is the WAN side IP if the device is in static mode, 192.168.2.1 is the default LAN port IP. To access the configuration page:

1. Directly connect your computer to the LAN port.
2. Make sure you computer is in DHCP mode, then release and renew the IP address. On a Windows platform, open a command window and use the commands ipconfig /release, then ipconfig /renew. Your computer will get an IP in 192.168.2.x segment.
3. Open web browser, and type in IP address which is 192.168.2.1, you will see the log in page.
4. Enter in default password which is admin.
5. On the configuration page, there is setting called WAN side http access, you can set it to be yes if you want to access it from the WAN side.