ITSP's

tphank · #1 (**permalink**) December 17th, 2005, 07:41 PM

I have setup several ITSP's for my phonegnome, and there are variable results. Not all ITSP's are 100% phonegnome compatible (call forward and Follow Me) may not work, but in most cases for outgoing calls they work fine. I tried setting up Stanaphone with PhoneGnome and am getting 1 way conversations. Destination can not hear me.
Anyone else having these types of issues?

BTW, I have used the same stanaphone account to place gateway calls on my spa 3000 without any issues!

PhoneBoy · #2 (**permalink**) December 18th, 2005, 07:49 AM

I personally would only use outbound-only services with PhoneGnome. Less likely to have problems.

tphank · #3 (**permalink**) December 23rd, 2005, 02:08 PM

I have used the stanaphone with the PG before, and it worked fine, even with the call forwarding features. Recently started having problems. When I check the Stanaphone account on my 3000, it is fine, same with softphones?

Also, not all outbound-only services work 100%... I started with Gizmo-Out, and the call forward features of PG did not work...

mukhtaruddin · #4 (**permalink**) April 20th, 2006, 09:55 PM

i am trying to setup Vbuzzer on phonegnome hardware t i am getting busy tone pls email me setting for Vbuzzer

asethi · #5 (**permalink**) April 20th, 2006, 11:03 PM

vBuzzer settings no longer work on my PhoneGnome. It used to work fine before but not anymore since last few weeks. It works fine on SPA3000.
There may have been some changes at the PG side or could be at vBuzzer side but am cluless as to why it should work from SPA3000 and a PC but not work from PG anymore.

asethi · #6 (**permalink**) August 22nd, 2006, 06:40 PM

I am finally able to get vbuzeer to work indirectly on my PhoneGnome via my voxalot account. Here is what I had to do to use the vbuzzer account on my PhoneGnome:

1. Created a free voxalot account ( voxalot.com)
2. Added vbuzzer as a provider to the voxalot profile.
3. Added the voxalot account credentials to the PhoneGnome.

Now placed calls using my PhoneGnome and was able to use the vbuzzer credentials.

After the above steps, you will have to wait for some time (at least an hour) and then when you place calls via PhoneGnome, you will see that they are beiing placed via vbuzzer account.

Cheers.

tphank · #7 (**permalink**) August 29th, 2006, 03:52 PM

Interesting issues with VBuzzer.... I had been using my phonegnome with my own asterisk installation without any issues for a while, but recently, every call would immediately terminate with a busy signal! When dialing the PG thru voxalot to my asterisk box, the calls go thru without an issue!!! Since I am not an approved ITSP PG support does not really care, even though no changes were made on my side!