[ewc]

Hi

We have an spa9000 with spa941 phones connected. At the moment we need to dial 9 to get out but we wnat to just be able to dial straight out. Can this be done?

[jamesnewbery]

Hi

It can indeed;

I have added

SIP TAB:
PBX Parameters
Call routing rule: (<:L2>0xxxxxxxxxx|<:L1>8xx.|<:L3>7xx.|<:L4>9xx.)
PBX Phone Paramaters
Phone dial plan: (0xxxxxxxxxx|9xx.|8xx.|7xx.|xxx|*xx)
Line 2 Tab:
Dial Plan
Dial Plan: (<:141>0xxxxxxxxxx)

Make sure that all the phones have the same "phone dial plan" (and the FXS ports in you use them)

The dial plan adds 141 (number witholding in the UK) you do not need this if you are happy for the recipient to get your DDI

All my calls go out via line 2, I am unsure if you can do it without specifying the specific outgoing line...


hope that helps


James

[ewc]

Thanks a lot that works great