[whatever_1]

How do I setup the spa3000 to let me call into my pots line and then call out on the VoIP? I have VoicePulse and no caller id on my POTS line, could this be done without caller id on the POTS line, could I use a my own PIN #? I assume this is done on the

[PhoneBoy]

This sounds like a job for the SPA3000 Configuration Wizard.

http://voxilla.com/spa3kconfig.php

[weiyu99]

Hi, I have BroadVoice and I used the wizard to setup my spa3000 but when I call my pots line and then call out on the VoIP I got "Your call can not be completed this time...." Any idea what can be wrong?

Thanks,
Dennis

[whatever_1]

Originally Posted by PhoneBoy

This sounds like a job for the SPA3000 Configuration Wizard.

http://voxilla.com/spa3kconfig.php

I don't have admin rights, VP has it locked...you woundn't know the password would you?

[RichShumaker]

VP won't let you have admin rights or let you change the firmware.

I just set up a broadvoice account because they will give you admin level control of your hardware.

I am trying to do this same thing. I didn't want to use the configurator unless I had too. I just thought there would be a check box or two to change.
I am trying to automatically let my incoming PSTN line connect to my VoIP line. So I call in to the PSTN line and it swithes me to an outgoing VoIP line.

Is there a single or few check boxes to do this?
Or do I need to use the configurator?

Thanks in advance.

Rich Shumaker