[dochartt]

Hi All,

Read all the old post to see if there was an answer there. If there is I must have missed it. Hope this is a new topic. Please realize that I am new to VoIP.

I need to configure both ports on the SPA3000 with BroadVoice service, two different numbers and two different plans. Have line one working with BroadVoice. The problem is line two. I called tech support at BroadVoice, they were as helpful as they could be since they are not familar with the SPA-3000 at all, yet. Made the changes they suggested but with no luck. When I dial even **** on line two, I get nothing. I will not be using any of the PSTN option now or at anytime in the next year at least.

Any ideas?

Best Regards,

Morgan

[c_montoya]

Morgan,
What do you mean by LINE TWO. The spa3k has only LINE1 port (FXS) and PSTN port(FXO)?

Sorry for the silly question but Are you triying to connect a handset to the PSTN port and then dial from there? If so that won't work because the PSTN port is FXO and a handset needs a FXS port to work.

If you want to know what FXS and FXO is go to http://www.voip-info.org/wiki-FXO

Temo

[dochartt]

Hi Montoya,

I had read a post by PhonBoy that I thought ment that it was either or, e.g. FXS line one and FXS or FXO for line two. Did I misunderstand? Do I understand corectly that the SPA-2000 both lines are FXS?

Best regards,

Morgan

Originally Posted by c_montoya

Morgan,
What do you mean by LINE TWO. The spa3k has only LINE1 port (FXS) and PSTN port(FXO)?

Sorry for the silly question but Are you triying to connect a handset to the PSTN port and then dial from there? If so that won't work because the PSTN port is FXO and a handset needs a FXS port to work.

If you want to know what FXS and FXO is go to http://www.voip-info.org/wiki-FXO

Temo

[PhoneBoy]

On a SPA3000, there is one FXS port and one FXO port. You can have one VoIP-type service that you can use normally and one VoIP-type service purely for SIP to PSTN or PSTN to SIP gateway functions. While I've said otherwise before, I've been set straight by Sipura on this. The SPA-3000 does allow for more than one outbound service.

The SPA-2000 has two FXS lines and you can have two independent VoIP services on each line.

[dochartt]

Hi,

Well life happens. If I find that post again, I will post a link to this post so others will know. What a great feature that would have been. Maybe that can be in the SPA-4000.

Best to all,

Morgan