[alom]

Hello Everyone,
we have a HQ and 2 branch office.We have 3 sipuras on each location.My boss at the HQ requires simpler way to dial to the branches.
this is how we dial to access branches.
from extension
dial 84 to access the sipura
dial 6130001# to branch 1
dial 808# to branch 2

could someone help design simple dial plan for this.

thank you

[hwittenb]

Without knowing anything else about your configuration, my guess is it would be something like this for 1# to office one, 2# to office two:
(<1#:6130001>S0|2#:808>S0)

[gabrielespnz]

How about if you dial 84, then you have to wait for a second to get the dial tone. How would you tell the box to wait for a second?

[hwittenb]

Originally Posted by gabrielespnz

How about if you dial 84, then you have to wait for a second to get the dial tone. How would you tell the box to wait for a second?

I don't think you can introduce a delay into the dialing once you start.

You originally said you dial 84 to "access the Sipura". I assumed that dialing was directed to your PBX.

The first dial plan above has an error. I left off a leading < It should have been
(<1#:6130001>S0|<2#:808>S0) or better practice reverse the # and number
(<#1:6130001>S0|<#2:808>S0) since the 2# is used for speed dialing .