[datto]

Hi Lads
can anyone help i am trying to get a disconnect tone for the sipura 3102/3000 for thailand. i have found these values but cant make a disconnect tone from them.
Thailand
Busy tone - 400 0.5 on 0.5 off
Congestion tone - 400 0.3 on 0.3 off
Dial tone - 400x50 continuous
Special dial tone - 400x50 0.4 on 0.1 off 0.4 on 0.1 off + continuous
Number unobtainable tone - 400 0.1 on 0.1 off 0.1 on 0.1 off 0.1 on 0.1 off 0.3 on
Offering tone, trunk - 400 0.17 on 0.17 off 0.15 on 0.17 off
Ringing tone - 400 1.0 on 4.0 off
Special information tone - announcement
Call waiting tone - 400 1.0 on 10.0 off 1.0 on

Thanks in advance

[cstewart]

Datto,

Yes I have the same problem configuring my SPA3102 in Thailand.
I am trying to get the VoIP to PSTN functionality working.
Every time I dial out to the PSTN I just get a busy tone.
The message in the info page for Reason for Last Disconnection: is "PSTN disconnection tone".
My SPA3102 came from Australia so by default is set up for the Oz telephone standards and tones.
Like you I need to find the configuration suitable for Thailand

[datto]

HI
stewart i found this one that works for me , hope it works for you
(400@-19,400@-19;3(.3/.3/1+2)

let me know
Datto

[cstewart]

Datto,
Your suggestion for the disconnection tone helped.
Now I do not get the disconnection tone for the Reason for last PSTN disconnection, however the end result is the same (ie busy tone).
My dial plan is Line1 is (*xx.|00|<#9,:>xx.<:gw0>).
So when I dial #9 i get a second dial tone (I assume this is the PSTN dial tone).
Then I dial a number and just get a busy tone.
The reason for last PSTN connection is now empty.
What are you other PSTN values say for "Line In Use Voltage" and FXO Port Impedance.
I have tried playing with these values but obviuosly my guesses so far are wrong.
Thanks for the help