[lewisr]

:shock:
I was able to make this work with both FXO and FXS on my local network but not over the internet. I appear to be getting through my IAD on both ends but the 3K is not responding. Can anyone supply a config that works in the most simple of all situations?

[jcgalvezv]

Why don't you explain exactly what you want to do and what have you done (configuration, etc). Then I believe I could help you.

[lewisr]

I want to connect a remote analog phone to an analog port on my PBX. I was able to make it work with 2 3K's on my local private network but when i try it over the Internet it doesn't work. I have tried so many things that I am now ready to set the options back to default and start over. The dial string on the Line1 is <:ip of the pstn end>. When i hooked this up locally i was able to get PBX dial tone but now that it is on the remote end i do not get it. there must be a pretty standard config for this function.

Thanks for any help.

[lewisr]

phone>3KLine1>Internet>3kPSTN>PBX calling by IP Address.

Pick up phone and get pbx dial tone. call pbx extension, phone rings.

[jcgalvezv]

If your IP addresses are not public you will not be able to connect the SPA3000 to the remote one.

[lewisr]

That may be the issue. they are private on both ends. is that true even if we open DMZ or map 5060 and 5061 to the private address?

[jcgalvezv]

I would recommend you to use FWD (fwdnet.net). Get two account from them and configure an account in each SPA3000. Then call by FWD user number.