 |
|
| News & Reviews |
Welcome to the Voxilla VoIP Forum.
Voxilla has been a trusted source for accurate, up-to-date information on the IP Communications industry since 2002. A dedicated staff of reporters and engineers produce feature articles and product reviews to keep industry watchers abreast of the people, companies, and trends driving a fast moving market.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
 Voxilla VoIP Forum |
 Sip3k.. VOIP call Ring PSTN line attached to GW0 Technical support, how-to guides, troubleshooting, and general assistance for Linksys hardware. |
 |
| | LinkBack | Thread Tools | Rate Thread | Display Modes |
June 27th, 2005, 07:04 AM
| |||
| |||
 Sip3k.. VOIP call Ring PSTN line attached to GW0 Hi, May be I asking a dump question...... I hv multiple extensions connected to same PSTN line using splitter. (y splitter or 1-3 splitter). When I get a call on my PSTN it rings all the 3 phones and I can talk from any. I also connected a RJ11 from splitter to SIP3k PSTN side. My question is, When I call my PSTN line and set, PSTN ring through enable, it rings the VOIP phone attached.. and I can talk with the same instrument on both PSTN and VOIP side... and also make calls on both PSTN and VOIP side, based on the dial plan, i setup in SIP3k. But, if I call my VOIP line, it rings only the instrument which is attached to SIP3k. It doesn't ring any other PSTN phones which are attached to the same PSTN line.. Is there a parameter in SIP3k, which needs to be enabled to get this working? ... Is it possible..? ...Sri     |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
| |
Similar Threads for: Sip3k.. VOIP call Ring PSTN line attached to GW0 | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Different Ring Back Tones when forwarding Line 1 thru gw0 | voipvoxer | Linksys (Sipura) VoIP Support Forum | 0 | February 27th, 2006 07:19 PM |
| SIP3K...VOIP<->PSTN.. need help | sri70s1 | Linksys (Sipura) VoIP Support Forum | 7 | June 27th, 2005 06:52 AM |
| Incoming VOIP call on PSTN does not ring phone one line 1 | palex9 | Linksys (Sipura) VoIP Support Forum | 2 | May 8th, 2005 12:58 AM |
| SPA3000 VOIP->PSTN OK but not using GW0 through Line 1 | henryhirst | Linksys (Sipura) VoIP Support Forum | 3 | March 20th, 2005 04:29 AM |
| HELP! VoIP call into Line 1 w/PSTN gw0 bridges VoIP2 | phiber | Linksys (Sipura) VoIP Support Forum | 1 | November 6th, 2004 07:52 AM |
Linear Mode
