[roscai]

hello,
i am very new on voip and all related to it. i have 2 voip providers one with a Spanish plan and an geographical number from spain, and other with an Romanian plan and a Romanian geographical number.
i have both of them configured on eyebeam and everything works fine.
i just brought an linksys pap2 european, and i need to configure it in order to use it with those 2 providers, one in line 1 and the other on the second one. i made the configuracion for one but i didn´t do this for the second one.
can someone give me a little help to configure it?
is using pap2 similar to eyebeam, i mean if i want to make an call just putting #1 or #2 the device use one of the 2 subscriptions.
something else, when someone calls me the phone doesn´t ring. any ideea?

[zmileta]

put the settings you're using for configure pap2. Basically you only put:
username
proxy
port
register=yes (if did)

[roscai]

1st voip provider_
Smartcall.ro
SIP Proxy: sip.smartcall.ro Domain/Realm: smartcall.ro Send internal IP: Always Username: roscai
Password: xxxxxx SIP port: 7169 RTP port: 22338 STUN Server: sip.smartcall.ro VAD: noRTP port min: 22336 RTP port max: 22340 Handle VIA received: no Insert VIA received: no Substitute VIA address: yes Handle VIA rport: no Insert VIA rport: no Send Resp to Src Port: no STUN enable: yes STUN Test Enable: yes STUN Server: sip.smartcall.ro In pagina Line 1: SAS Enable: no NAT Mapping Enable: yes NAT Keep Alive Enable: yes SIP port: 7169 Proxy: sip.smartcall.ro Use Outbound Proxy: no Use OB Proxy In Dialog: no Register: yes Display name: roscai User ID: roscai Password: xxxx Use Auth ID: yes Auth ID: roscai second provider:
voztele.com using intravoz service they provide me this conf:
Usuario de red:
3400005xxxx
Password de red:
xxxxxxxxxxxx
Proxy SIP
voztele.com
Outbound proxy:
nat-es-01.voztele.com:5062
Supported codecs:
G729, G711A/U, G723

Thats all that i have, but don´t know hw to use it. thank you for your help!

[cj_abanto]

Friends I cannot connect with my equipment(team) PAP2T already form in agreement to Voxilla - Linksys PAP2-NA, PAP2T-NA Configuration Wizard but I continue with problems have hung my configuration in Linksys PAP2 Configuration

THANK YOU!!

[hwittenb]

cj_abanto:
The Info tab shows line 1 (VoipStunt) registered, line 2 (GizmoProject) not registered due to "can't connect to login server."

Line 2 configuration looks OK assuming your user id and password are correct. What problems are you having?

Can you make a call on line 1 thru VoipStunt?

You saved the configuration in basic view. It would be better if next time you saved it in advanced view.