[Serhat]

Hi,

As you know this is default dial plan:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

This is my dial plan:
(<:90312>[2-9]xxxxxx|<0:90>[2-5]xxxxxxxxx|<:>xxxx|<:>xxxxxx|<:>00x.)

The thing i dont understand is, in the current dial plan the ring tone lives much more longer and the time amount between two digits also longer then mine. If i play with short timer, it is close to solve the problem but the new problem is customer has to wait more till the phone decides there is no new digit dialing and starts the call.

So how am i going to increase this amount without increasing the digit not dial decision.

Or which part of the default dial plan makes this ring tone last and wait longer.

Thanks.

[bendernz]

Sx where x = a number in seconds will adjust this.

E.g.: <0:90>[2-5]xxxxxxS5 would make the phone wait 5 seconds. S0 will cause the phone to dial immediately as soon as that pattern is matched.

[Serhat]

yes I knew that but for some reason I did not think about it

I increased Interdigit Short Timer and shorten the calling duration with hot line S0.

It solved much of the problem.

Thanks for your reply