[Minh]

Dear.

I have 3 VOIP accounts, FWD, Mutualphone and Iconnecthere. I just wonder how to setup those accounts in SPA3000 at [PSTN LINE] so when I use my cellphone to call my home PSTN number then SPA will open VOIP port and let me dial using either FWD or Iconnecthrere or Mutualphone account.

Any one has any idea how to setup like this ?


Thank

Minh

[fuadar]

although thisis mentionedi n the faq.
you need to enable the pstn to voip gateway.
you can set a pin or no pin .
also you can set how many rings you want you sipura to recive .
you have to furnish your voip providers info in the psstn line page in ther admin/advaced mode of your sipura

Originally Posted by Minh

Dear.

I have 3 VOIP accounts, FWD, Mutualphone and Iconnecthere. I just wonder how to setup those accounts in SPA3000 at [PSTN LINE] so when I use my cellphone to call my home PSTN number then SPA will open VOIP port and let me dial using either FWD or Iconnecthrere or Mutualphone account.

Any one has any idea how to setup like this ?


Thank

Minh

[Minh]

Thank you for your help. I can setup only one account VOIP in PSTN tab thru LINE2 as your instruction but my question, can I setup more than one account so I can dial out to use which provider I want ?

Thank

Minh

[bobthi]

You should use gw1-gw4 in Line1.
Then use the dial plan section of Line2 and say which gwX you want to use.
That's all.

Bob.

[Minh]

I am not quite sure as you are mentioned about using gw1-gw4 in line1. I mean, when I am on the road I wanted to use my celphone to call to PSTN line of spa 3000 and use PSTN to pick up VOIP2 and selecting multiple VOIP providers calling out in PSTN tab. (I am not sure about we can use PSTN to Line1 for multiple gateways, maybe some bodys know about it, then please help me). For example, I can call my friend overseas at FWD numbers or using Mutualphone international low rate calls just by my celphone to the spa 3000 from my home. What I need help is how to setup the dialplan for differrent providers.

Would some body help me please.

Thank you

[jcgalvezv]

In PSTN line's dial plans you can use something like (xx.<:@gw1>) being this gw1 the one configured in Line 1's gateways, This works pretty fine. I have been using this syntax for a while. I guess you will have to configure your PSTN-to-VoIP to ask for password and use a different password for every different gateway.

Juan C.

[Minh]

It works good. Thank you very much Juan. Do you think we can set more than 4 Gateways in this setup ?

Minh

[jcgalvezv]

I have not tested, but I guess you can set something like (xx<:@server;uid=xxx,pwd=xxx;nat>) in PSTN line's dial plans.

Juan C.