Voxilla VoIP Forum

yaman · #1 (**permalink**) February 17th, 2006, 01:36 PM

i have 5 PAP2 in a network, using from port 5060 to port 5069

to establish port forwarding, i would need to port forward:

5060-5061 to the ip address of the PAP2 no1
5062-5063 to the ip address of the PAP2 no2
5064-5065 to the ip address of the PAP2 no3
5066-5067 to the ip address of the PAP2 no4
5068-5069 to the ip address of the PAP2 no5

isnt it? if yes, is there any other way?

thanks

pap2boy · #2 (**permalink**) February 17th, 2006, 01:47 PM

What about using STUN Server options on each PAP2? This is what I configured all my PAP2 units behind my WRT54GS v3 router. Be sure to read this post to enable those VIA options.

yaman · #3 (**permalink**) February 17th, 2006, 02:26 PM

Quote:

Originally Posted by pap2boy

What about using STUN Server options on each PAP2? This is what I configured all my PAP2 units behind my WRT54GS v3 router. Be sure to read this post to enable those VIA options.

unfortunately, the router used in this specific environment is using a symetric NAT

thanks

pap2boy · #4 (**permalink**) February 17th, 2006, 02:39 PM

What is the brand/model of the router? This way, when I need to buy for a new router, I will stay away from this one.

yaman · #5 (**permalink**) February 17th, 2006, 02:50 PM

Quote:

Originally Posted by pap2boy

What is the brand/model of the router? This way, when I need to buy for a new router, I will stay away from this one.

it is more a security software base, it is called instagate http://www.esoft.com/

mberlant · #6 (**permalink**) February 17th, 2006, 03:20 PM

I would put the PAP2s in eSoft's DMZ, since there is no security thread to doing so. It would save you many management headaches, probably including having to assign a unique RTP port range to each PAP2 and configure that into the firewall.

yaman · #7 (**permalink**) February 17th, 2006, 03:38 PM

Quote:

Originally Posted by mberlant

I would put the PAP2s in eSoft's DMZ, since there is no security thread to doing so. It would save you many management headaches, probably including having to assign a unique RTP port range to each PAP2 and configure that into the firewall.

can you enable DMZ to all the 5 ip addresses of the PAP2, meaning can you enable it to a range of ip addresses?

bcoz in the few routers i saw i can only see DMZ enable to an ip address but not multiple ip addresses.

please advise

thanks

pap2boy · #8 (**permalink**) February 17th, 2006, 04:32 PM

Honestly, I wouldn't never recommend anyone to pernamently use a DMZ. As a test bed, it is OK.

yaman · #9 (**permalink**) February 17th, 2006, 04:42 PM

Quote:

Originally Posted by pap2boy

Honestly, I wouldn't never recommend anyone to pernamently use a DMZ. As a test bed, it is OK.

thanks

User Name		Remember Me?
Password
No account yet? Create one
Forgot your Username or Password?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads for: 5 PAP2 & portforwarding on one single network
Thread	Thread Starter	Forum	Replies	Last Post
SPA-2002 single line with VoicePulse Connect & Voxee	jnykiel	Linksys (Sipura) VoIP Support Forum	4	January 13th, 2006 06:46 PM
PAP2 + AT&T telephone = No Caller ID	Green	Linksys (Sipura) VoIP Support Forum	4	January 9th, 2006 09:04 PM
Debug server for Sipura & Linksys PAP2	chirag_pathak	Linksys (Sipura) VoIP Support Forum	3	December 24th, 2005 03:54 PM
Sipura SPA 2000 & linksys PAP2	chirag_pathak	Linksys (Sipura) VoIP Support Forum	1	December 18th, 2005 02:40 PM
Comparisons between the Sipura 3000 & Linksys PAP2	jgxhs	Linksys (Sipura) VoIP Support Forum	6	October 11th, 2005 10:49 PM

Voxilla VoIP Forum

5 PAP2 & portforwarding on one single network