[DracoFelis]

Anyone got IconnectHere working (for outbound only) as one of the 4 "gateway" providers of a SPA3000?

No big deal if I can't get it working, as the promo account has under $3 in it. But just for grins, I decided to try out my free IconnectHere account, that came with my SPA3000. Now naturally, the instructions called for using the Wizard to configure things, and just as naturally the wizard's settings won't work without overwriting the providers I already have programmed into my SPA-3000 (I've already got FWD as the main "Line 1", and both DialPad.com and Teliax.com as "gateway" providers). So I figured I would just manually setup IconnectHere as "gateway 3", right? Only trouble is it doesn't seem to be working (I just get a fast busy when I try to dial).

However, I know the (promo) account is good (and I have the correct 8 digit account number AND 4 digit password), both because I can log into the web portal with that info AND because I can call out from FWD (using the **334 gateway to IconnectHere) with that info. And I copied the GW3 provider "dial plan" pattern directly from my GW2 pattern (only changing the gateway used, and the digit to select the provider), so I don't think it's the dial plan either. But I still get a "fast busy" when I try to use it directly. Here are the SPA3000 settings that are going nowhere:

Gateway 3: my_8_digit_account@natrelay.deltathree.com

GW3 Auth ID: my_8_digit_account

GW3 NAT Mapping Enable: yes

GW3 Password: my_4_digit_password

Dial Plan pattern (dial via "# 7 number_to_dial #"):
<#7:>[x*].<#:>S0 <:@GW3>

BTW: These are the same sorts of settings (obviously with different account numbers) that work fine with both my "gateway 1" provider (DialPad.com), and my "gateway 2" provider (Teliax.com). But for some reason I'm not getting anywhere when I try this with IconnectHere and "gateway 3". Anyone know of a setting I'm missing, or have wrong (for this provider)?

[campuschill]

Hi, I have the same settings as yours except for the dial string. My dial string for gateway 2 is

<#2,:>xx.<:@gw2>

However voice quality is highly choppy in a call, almost unintelligible. Could this be a codec problem. Is there a way the preferred codec can be forced using the dialstring for the outbound gateway on the SPA 3K.

[campuschill]

Update, I forced the codec to G726-32 using the codec selection codes, still the audio is highly choppy

[campuschill]

I forced G723 codec and now the voice quality has improved a lot.

[DracoFelis]

Since I started this thread sometime back, I thought I would give a followup. For some unknown reason, the setup just started working on it's own.

Maybe something got "stuck" in the Sipura internals, and resetting some other things "unstuck it"? Or maybe something changed with the IconnectHere proxy end. But for whatever reason, the setup with IconnectHere just started working, about the time I was just going to give up with the service...

[Jaco]

Dracofelis,

i have the same problem, but i still having the same fast busy tone can you send tell me how the correct configuration parameters for Line 1 with FWD (FREE WORLD DIAL UP) for inbound calls and Deltathree account as Gateway 1 for outbound calls, i will appreciate very much your cooperation with this issues i am having.

regards


Jaco

Originally Posted by DracoFelis

Anyone got IconnectHere working (for outbound only) as one of the 4 "gateway" providers of a SPA3000?

No big deal if I can't get it working, as the promo account has under $3 in it. But just for grins, I decided to try out my free IconnectHere account, that came with my SPA3000. Now naturally, the instructions called for using the Wizard to configure things, and just as naturally the wizard's settings won't work without overwriting the providers I already have programmed into my SPA-3000 (I've already got FWD as the main "Line 1", and both DialPad.com and Teliax.com as "gateway" providers). So I figured I would just manually setup IconnectHere as "gateway 3", right? Only trouble is it doesn't seem to be working (I just get a fast busy when I try to dial).

However, I know the (promo) account is good (and I have the correct 8 digit account number AND 4 digit password), both because I can log into the web portal with that info AND because I can call out from FWD (using the **334 gateway to IconnectHere) with that info. And I copied the GW3 provider "dial plan" pattern directly from my GW2 pattern (only changing the gateway used, and the digit to select the provider), so I don't think it's the dial plan either. But I still get a "fast busy" when I try to use it directly. Here are the SPA3000 settings that are going nowhere:

Gateway 3: my_8_digit_account@natrelay.deltathree.com

GW3 Auth ID: my_8_digit_account

GW3 NAT Mapping Enable: yes

GW3 Password: my_4_digit_password

Dial Plan pattern (dial via "# 7 number_to_dial #"):
<#7:>[x*].<#:>S0 <:@GW3>

BTW: These are the same sorts of settings (obviously with different account numbers) that work fine with both my "gateway 1" provider (DialPad.com), and my "gateway 2" provider (Teliax.com). But for some reason I'm not getting anywhere when I try this with IconnectHere and "gateway 3". Anyone know of a setting I'm missing, or have wrong (for this provider)?

[DracoFelis]

Originally Posted by Jaco

Dracofelis,

i have the same problem, but i still having the same fast busy tone can you send tell me how the correct configuration parameters for Line 1 with FWD (FREE WORLD DIAL UP) for inbound calls and Deltathree account as Gateway 1 for outbound calls,

I discribed my setup here:
http://www.broadbandreports.com/forum/remark,14179920

NOTE: I have discovered that sometimes the Sipura just refuses to have settings "take" until you "power cycle" the adapter. So you might also try unplugging the adapter, waiting a few seconds (to make sure the adapter is fully "powered down"), plugging it back in, and again waiting a few seconds (for the adapter to finish "registering").

[Kamran]

Jaco, I have FWD setup as my LINE1 (for incoming calls via ipkall), and use ICH os GW1 and another account from ICH on GW2 for outgoing calls.
I have this setup for over 2 months now and going great.

[ravipati]

Originally Posted by DracoFelis

I discribed my setup here:
http://www.broadbandreports.com/forum/remark,14179920

NOTE: I have discovered that sometimes the Sipura just refuses to have settings "take" until you "power cycle" the adapter. So you might also try unplugging the adapter, waiting a few seconds (to make sure the adapter is fully "powered down"), plugging it back in, and again waiting a few seconds (for the adapter to finish "registering").

Thank you very much it was very helpfull.