HT-488 Can't access the Web Configuration Menu

[tata2_br]

I have purchased a HT-488 ATA from Voxilla Store a few days ago. Despite several attempts I can't access the Web Configuration Menu for the LAN port at http://192.168.2.1, although it has been entered through the IVR prompt.
Switiching to the WAN port and entering this same address or another one from my local network doesn't work either.
How to overcome this problem?
Thank you very much for any clue.
Alexandre

[ivanth]

The WAN side http access is disabled for security reason, you can enable it from LAN side on the configuration page. 192.168.0.160 is the WAN side IP if the device is in static mode, 192.168.2.1 is the default LAN port IP. To access the configuration page, do the procedures below:



1.- directly connect your computer to the LAN port,
2.- make sure you computer is in DHCP mode, then open a command window, then do

[tata2_br]

Thanks a lot Ivanth. Your step-by-step tutorial worked fine.