[scoobymagic]

Hi

I set up a 3cx pbx with GWX3104 in the uk and it worked fine. I have transfered it to spain and now it does not work. I have tested as much as I can. Calls seem to get to the 3104 from the 3cx system, the fxo light comes on for the connected line, but all I hear on the phone is silence. As far as 3cx is conceanred it has connected the call.

16:13:38.611MediaServerReporting::SetRemoteParty[MS210002] C:7.2:Offer provided. Connection(transcoding mode): 192.168.70.10:7030(7031)16:13:38.611CallCtrl:nSe lectRouteReq[CM503004]: Call(7): Calling: PSTNline:10001@[Dev:sip:10001@192.168.70.40:5060, Dev:sip:10002@192.168.70.40:5062, Dev:sip:10003@192.168.70.40:5064, Dev:sip:10004@192.168.70.40:5066]16:13:38.611CallCtrl:nSelectRouteReq[CM503010]: Making route(s) to [sip:00442070317031@192.168.70.10]16:13:38.611MediaServerReporting::SetRemoteParty[MS210000] C:7.1:Offer received. RTP connection: 192.168.70.20:5016(5017)16:13:38.611CallLeg::setRe moteSdpRemote SDP is set for legC:7.116:13:38.611Extension:rintEndpointInfo[CM505001]: Ext.4100: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [snom-m3-SIP/01.01 (MAC=0004132A032A; HW=1)] Transport: [sip:192.168.70.10:5060]16:13:38.596CallCtrl:nIncomingCall[CM503001]: Call(7): Incoming call from Ext.4100 to [sip:00442070317031@192.168.70.10]

I am not sure if this is related to a difference in tones for the different countries, if it is, I am not sure how to program them in to the grandstream, I have seen a database of different tones on the web, but as I say not sure how to enter this data in the correct syntax. If it is somehting else it has got me stumped! any help greatly apreciated. I am able to make outbound calls via the VoIP connection I have with inphonex, so that aspect does work, so does extension to extension.