[pinio]

Hi,

I have problem because I bought GXW-4004 and I can't receive PSTN calls. I was studying user guide before purchase and I was assuming that life line feature will make the unit to receive PSTN calls to port #1 even if the profile is registered. Now I know I was wrong. I'm trying to find a solution (returning it is not an option). I've found information how to configure HT488 to forward incoming PSTN calls over internet to another HT488 unit using "Off-Hook Auto Dial" feature http://www.grandstream.com/WEBBACKUP.../FAQ/488-b.htm. The same option exists in GXW-4004 and I wonder if I can connect PSTN line to port2 and forward it to port1?

Any help would be appreciated.

Thanks,

Artur

[Marceli]

I'm not sure if this can be done, try using IP forward to second port. I do not know if this work :>

For this:
set up one prifile to WAN IP of 4004 (same as http://www.grandstream.com/user_manu...GXW_Series.pdf )

Set Line 2 to this Profile

Set off-hook as anythink :>

[Leon-tcs]

On the fxo gateway such as spa3100 or shang332, there are some setting for auto dial from pstn to sip. but the gxw 4004 is a fxs gateway, normally, fxs gateway don't have it. gxw4104 is fxo gateway. if you want to receive pstn call, you have to use fxo type.
http://www.telecomchinasourcing.com/knowledge

[pinio]

Thanks for your reply,

In the mean time I contacted Grandstream support and they confirmed that I can't receive PSTN calls using this unit but I will try to use ht-488/ht-503 instead of very expensive gwx-4104.

Artur