[Dworjanyn]

SIP Port question.
I am running one provider on FXS#1 using default SIP pert 5060, and server IP:5060
I am trying to setup a second provider on FXS#2, default SIP port 5062.
For the second SIP server I have tried IP:5060 and 5062, without success.

Anything else I need to change in FXS#2 setup??

Thanks

[Marceli]

Sip port cannot be same on both port.

Thats all what is need (default is FXS1 = 5060, FXS2 = 5062). Check if operator do not chnage this port to other.

[Dworjanyn]

For FSX#2 I have set the SIP address to 194.120.0.198:5062, corresponding to the local SIP port, 5062
The FSX2 Account did NOT register, and I don't get a dial tone.

Identical setup on FSX1 (using port 5060) works fine.

Anything else I can try?

Thanks

PS I never got my NAT service from Linksys RouterBEFSX41 to work, that is why I am using direct IP addressing.

[Marceli]

both ip server is same.

Below you have SIP port: 5060 (FXS1)
and sip port: 5062 (FXS2)

Other thing can be: second provider need to have set
register expireation lower than 60 minutes (default). Check or set it to 1 minute.

You can also start syslog service and look for errors, then you know what is wrong.

Syslog instalation is on forum.

[astronomax]

Hallo,

I had the same problem, and the only way I could solve it was to set the option:
"USE RANDOM PORT" to "YES"

for both port FXS#1 and FXS#2