[georgecebu]

Do you know how to configure SPA3102 if I call my callcentric number it automatically connect to my inphonex account? thanks...

[hwittenb]

Originally Posted by georgecebu

how to configure SPA3102 if I call my callcentric number it automatically connect to my inphonex account?

You need to explain what you mean by "automatically connect to my inphonex account."

If you mean ring a phone that is configured for your inphonex account you can forward all calls to your callcentric number to your inphonex number on the CallCentric Preferences DID Forwarding page at the account level.

If you mean bridge an incoming call on the 3102 with an outgoing call on your inphonex account that is VoIP to VoIP calling which is difficult to do on the SPA3102. The easiest thing would be to have another adapter that you attach to the PSTN (Line) port of the SPA3102 because the SPA3102 was designed to bridge a VoIP call with a pstn line call.

You can also do this is an account at Voxalot where you register your CallCentric number there.

If you wish to call a CallCentric DID and make outgoing calls, CallCentric has a "calling card" function as an option for your DID (number). If you set the DID number up this way, you can then call the number and make outgoing calls using your CallCentric account.

InPhonex also has a "calling card" function where you can call one of their "access numbers" and use prepaid credit on your InPhonex account.

[georgecebu]

so I really need to buy another VoIP adapter so that I can bridge it to my pstn line. How about using the gateway future's? does this future can route call from gateway0 to gateway1?

[hwittenb]

Originally Posted by georgecebu

so I really need to buy another VoIP adapter so that I can bridge it to my pstn line.

The other alternative you can try is strapping the FXO (line) port to the FXS(phone) port with a cable that has RJ11 connectors on each end so that the call is changed to analog and uses the FXS (phone) and FXO (Line) ports. The call goes out one port and comes back in the other. The SPA3102 was not designed with this in mind, however you can find a discussion about the technique.

How about using the gateway future's? does this future can route call from gateway0 to gateway1?

No. The dial plan for an incoming call from the FXO port (pstn) can use gateway 1 for an outgoing VoIP call but you can not do what you want to do with an incoming VoIP call to make an outgoing VoIP call. They didn't design the SPA3102 that way.

[georgecebu]

so thats it... I really got the answer, now I need to buy another adapter... ok thanks alot for your time... more power to you...