FWD - No Longer Free

[hwittenb]

Originally Posted by hunok99

but do I have to insert acc_number@in.callcentric.com to the dial plan under pstn tab??

You need to test it out. I believe you can do something like this |xx.<:@in.callcentric.com| if you are dialing a number or the same thing with the number filled in.

You need to enable ip dialing.

[hunok99]

Thanks Guys, but I'm not sure If I'm clear enough with my question.
3102 in EU-connected to Slovak land line. All incomming calls to this PSTN account I need to be forwarded to Line 1 on my 3102 in US.
Calls in-out on both Line1s working OK.
I can dial in and get the Slovak DT here in the US, but I can't forward the incoming land line calls on the US 3102's Line 1.
I'm not sure that the insertion of |xx.<:@in.callcentric.com|into the line1 tab's dial plan will take care of it but I'll try.
How about the pst dial plan? On FWD service I have (S0<:123456) and that does the trick.
On callcentric - NOT.

[boatman]

Originally Posted by hunok99

How about the pst dial plan? On FWD service I have (S0<:123456) and that does the trick.
On callcentric - NOT.

I am not a big fan of Callcentric because they require SIP registration every 60 seconds in order to receive calls, and because their network seems to be closed to outsiders except for Sipbroker.

I have never been able to reach any Callcentric number using form 17771234567@in.callcentric.com or 17771234567@callcentric.com from a non-Callcentric account, however 17771234567@callcentric.com works from a Callcentric account.

To reach a Callcentric number from a non-Callcentric phone I use *46217771234567@sipbroker.com. By the way, 17771234567 is an actual Callcentric number you can use for test purposes, it connects to the Tell-Me service.

Where you had (S0<:123456) you should try (S0<:*46217771234567@sipbroker.com) but replace 17771234567 with your own Callcentric number.

What else in your scheme is still not working?

[hunok99]

Hello!


This works in the PSTN dialplan (S0<:*46217771234567@sipbroker.com)
I think it stats ringing 2-3 rings ahead on EU end before it rings on US spa and the CID shows in both lines the number - no name.


This is not:17771234567@callcentric.com

This one I didn't try 17771234567@in.callcentric.com
- but I will later.

I will check out Call with us later
Thanx Guys!

[boatman]

Originally Posted by hunok99

I think it starts ringing 2-3 rings ahead on EU end before it rings on US spa and the CID shows in both lines the number - no name.

If quick response time is important you should reexamine the possibility of forwarding the call directly to the other ATA, without using anyone's proxy. Many broadband Internet connections have a public IP address that never changes, or changes very rarely. If the receiving end has a stable public IP address then it's easy to forward the calls directly to the other ATA without using a proxy.

[hunok99]

I do not have static IP
But I will try the ....@in.callcentric.com as soon as I get again the EU SPA's IP.
BTW how do i set it through IP??? S0<:?????? ?
Thanks a lot!!!

[boatman]

Originally Posted by hunok99

I do not have static IP:(

Do you mean officially? Many of us have an IP address that changes only once or twice a year even through we do not pay for the static IP option.

Originally Posted by hunok99

But I will try the ....@in.callcentric.com as soon as I get again the EU SPA's IP.

My DNS server can't resolve in.callcentric.com. Is there anyone who can resolve this name to IP numbers? If so give us the numbers please.

Originally Posted by hunok99

BTW how do i set it through IP??? S0<:??????

Construct the direct SIP address in the usual way: User_ID@public_IP_address:SIP_Port

For example, 17771234567@204.11.192.23:5060

Of course you will have to forward the ports (both the SIP and RTP port ranges) if your ATA is not on the public IP address. Set to yes; "Make Call Without Reg" and "Ans Call Without Reg", also you probably want to set "Enable IP Dialing". The speed dial entries are handy for testing these SIP addresses.

[hunok99]

Well I just found out that my Gateway accounts won't work anymore!
I have VoipDiscount set on it, and can't make calls. This is the setting recomended by callcentric:
Use Outbound Proxy:yes
Use OB Proxy In Dialog:yes
Register:yes
Make Call Without Reg:no
Ans Call Without Reg:no
Use DNS SRV:yes
DNS SRV Auto Prefix:yes
Any ideas??? Thanks for your time!

[boatman]

I make outbound calls through Voipdiscount (I do not receive any calls through them). I use the following settings and never had any problems:

Use Outbound Proxy: no
Use OB Proxy In Dialog: no
Register: no
Make Call Without Reg: yes
Ans Call Without Reg: yes
Use DNS SRV: no
DNS SRV Auto Prefix: no

My SPA2102 is configured according to my how-to post here (How to quickly configure your Linksys ATA).

[hunok99]

Thanx for your answer again!
Ifd you have little time what is the difference between "yes or no" on these setting? What they control in the in the functionality?