Linksys SPA3102 PSTN-to-VoIP

[RevDarkman]

Hi all - anyone successfully configured one of these with CGPro? all i want it to do is pass on any PSTN call to a specified extn in CGPro

Regards

Ifan

[eric]

Yes, there are two ways to do it.

You can either create an account for the SPA3102 and have it register, just like a phone would.

Or you can configure the SPA3102 to route calls to the CGP server without registering.

You basically setup IP dialing and send all the inbound calls to the extension address extn@cgpserver.com.

[RevDarkman]

Well like others I am finding this ever so difficult, together with the abysmal Linksys documetnation!

I have found this to help setup the SPA for UK PSTN... (for others if needed!)

http://www.provu.co.uk/pdf/sipura/si...l_settings.pdf

All i have succeeded to do so far is to have teh SPA identify that the PSTN line is idle or Ringing, I have a Dial Plan in the PSTN Line tab like so..

(S0< :201@mail.solet.co.uk >) (I have also tried it with 201@192.168.10.2)

and various other setting all over the place - trouble is most of the documentation I find is aimed at the 3000, and there seem to be little differrences!

I will soldier on................