SRTP certificate for PAP2

md_27514 · #1 (**permalink**) November 16th, 2005, 08:00 PM

Is there any chance you can make the Voxilla's SRTP certificate available for Linksys PAP2-NA? It should not be too complicated as it is essentially a clone of SPA-2000.....

jcgalvezv · #2 (**permalink**) November 16th, 2005, 08:35 PM

I guess you can take a Sipura certificate and install it in your PAP2.

Juan C.

md_27514 · #3 (**permalink**) November 16th, 2005, 08:48 PM

It does not quite work, the web menu is a bit different and the certificate does not upload.

PhoneBoy · #4 (**permalink**) November 21st, 2005, 07:40 AM

As far as I know, there isn't any difference in the PAP2-NA that would cause the certificate to not install. What happens when you try to use it? Can you explain in more detail?

md_27514 · #5 (**permalink**) November 21st, 2005, 05:59 PM

Dear Phoneby, thank you for your interest.
What goes wrong is the following. When you fill out the form (IP address, display name and phone number) a new widows pops out where you have to click "Install certificate". On Sipura after you click it the certificate is installed. On PAP2 when you click it you get "page cannot be found". The address in my bowser points to http://192.168.1.104/admin/asipura.spa (192.168.1.104 is indeed the ip address of my PAP as I get get to the admin web pages). I guess the problem is with ".../asipura.spa" I'm sure linksys guys when they cloned the firmware has changed it to something else.

md_27514 · #6 (**permalink**) November 21st, 2005, 06:15 PM

Just a brief update.

The problems is indeed that the secure webpage saying "Thank You for using the Voxilla Certificate Authority Press the "Install Certificate" button" points to wrong address. I opened it in the browser to see its source, both SRTP certficate and password were there in plaintext, so I was able to cut and paste them and install the certificate manually.