SIPURA 3000 PSTN to VOIP REMOTLY ???

[lapsenterprises9]

I'm trying to set up the SIPURA 3000 with my BROADVOICE service, so I will be able to call the PSTN, FXO line (772-461-7633, BELLSOUTH LINE LIKE YOURS) and make a call on my VoIP line (772-264-1444) When I'm out of my office, I did set up a PIN so when I call my PSTN line (772-461-7633) I put this 4 digit PIN and the VoIP line (772-264-1444) gives me dial tone that I need, I'm able to dial all is OK but after I finish to put all the numbers, ring a couple times then a recording comes and says "THE CALL COULD NOT BE COMPLITED, PLEASE TRY YOUR CALL AGAIN LATTER" My goal is to make calls from REMOTE locations, my Mobile Phone and other phone numbers when I'm out.

Would some body please call me or teach via EMAIL how to do it >>> 772-519-2205 <<<

[floepie]

I called, but I couldn't get through.

[PhoneBoy]

Did you use our configuraton wizard to configure your SPA-3000?

[markiper]

This question may sound silly, but don;t you get charge every time you do that utilizing the sipura 3000. I mean, due to the fact that only only license is utilized to make both calls, BELLSOUTH will charge you some kind of a penalty, or am I wrong??? I was planning to setup the same type of system for my house, especially to make international calls, but that little detail stopped from putting the whole thing together. If you already have it working, and do not have incurred in other charges either with the phone company or Broadvoice, pleas let me know to see if I can do the same thing in my house.....e-mail : marco@sectechnologies.com

[prestonlewis]

Originally Posted by markiper

This question may sound silly, but don;t you get charge every time you do that utilizing the sipura 3000. I mean, due to the fact that only only license is utilized to make both calls, BELLSOUTH will charge you some kind of a penalty, or am I wrong??? I was planning to setup the same type of system for my house, especially to make international calls, but that little detail stopped from putting the whole thing together. If you already have it working, and do not have incurred in other charges either with the phone company or Broadvoice, pleas let me know to see if I can do the same thing in my house.....e-mail : marco@sectechnologies.com

Bellsouth only knows that his land line called a CLEC number (VOIP line). That's it. Bellsouth has no idea what happens after the CLEC's VOIP line answers. No penalties. You pay Bellsouth's fees to call the VOIP line and that's the end of it as far as they are concerned. Once the call turns into a VOIP call, Bellsouth is out of the picture.

[benjaminthefirst]

I have tried the wizard but have been unable to gain access remotely. I would really appreciate any help thanks

[mberlant]

How remote are you? Are you able to see the administration screens of the SPA?

[lapsenterprises9]

Hi all here is POLO again asking for your help !!!

It was working just fine like this >>> Under the audio configuration of the PSTN Line, change DTMF Process INFO: to NO and DTMF process AVT: to NO. <<< Sudently STOP to work I'm NOT able to make any more call from my MOBILE PHONE or any REMOTE LOCATION in to my FXO Gateway to my SIPURA 3000 !!!!!!! I smell some thing FISHY, I did the TEST standing next to the SIPURA 3000 Using my other line from my home, I put my PASSWORD, I get DIAL TONE but after I finished my dialing I get a QUICK BUSY SIGNAL !!! Them right after I hang up the REMOTE DEVICE the VoIP Phone RINGS and the green light from the SIPURA 3000 Blinks in atempt to RESET itself. here is my configuration if some body can help me:
http://www.geocities.com/lapsenterprises9/advanced.htm