Quote:
Originally Posted by marek  I just got a new Nokia E61 which I think is basically the same software of the E60. I have Broadvoice but I havent been able to configure it properly.
Would it be possible for you to share your conection settings for Broadvoice? Thanks in advance. |
Please follow the steps closely; this is not totally my work; I googled most of it. Got it to work with my Nokia E61. I suggest you use bluetooth headset or regular headset to talk rather than the handset for the better sound quality.
Before you start, you need to go to
https://www2.pbxes.com/index_e.php to register a free account; this serves a a bridge to your Broadvoice account; without it, it does not work as Nokia e61 does not suuport STUN. Then:
1. Login to your “pbxes.com” account and goto “Extensions” -> “Add Extension” -> choose “SIP”.
1a. In “Extension Number” enter “100″.
1b. In “Display Name” enter “My e61 phone”.
1c. In “password” enter any password, let’s say “testing”.
1d. Check "Yes" on Mobile options section.
1d. Press “Submit”.
2. Now goto “Trunks” -> choose “Add SIP Trunk”.
2a. In “Trunk Name” enter “Broadvoice”.
2b. In “Account - username” enter your Broadvoice” account, example “408*******”.
2c. In “Account - password” enter your “Broadvoice” SIP password.
2d. In “Account - SIP Server” enter “sip.broadvoice.com”.
2e. Press “Submit”. That’s it other fields just leave as they are do not need to fill them in.
3. Now goto “incoming Calls”.
3a. In “regular hours” and in “after hours” select “Extension” and choose your extension, should be “100″ as we had it setup already.
3b. Hit “submit”.
4. Now goto “Inbound Routing” -> choose “Add Incoming Route”.
4a Select “Extension” and choose your extension, should be “100″ as we had it setup already.
4b. Press “Submit”.
5. Now goto “Outbound Routing” -> choose “Add Route”.
5a. In “Route Name” enter “Broadvoice”.
5b. In “Dial Patterns” enter “XX.” don’t forget a dot after XX.
5c. In Trunk Sequence select “SIP/sipphone”
5d. Hit “Submit”.
1. On Nokia e61 goto “Tools” -> “Settings” -> “Connection” -> “SIP settings” -> hit options and choose “Add new” -> “Use default profile”.
1a. In “Profile name” enter “pbxes”.
1b. In “Service profile” choose “IETF”.
1c. In “Default access point” choose your connection. (it should be “WiFI” with GPRS I cannot guarantee quality).
1d. In “Public user name” enter “yourPBXESusername-100@pbxes.org” (note. type your username you registered with PBXES).
1e. In “Use compression” select “NO”.
1f. In “Registration” select “Always ON” you may choose other later.
1g. In “Use security” select “No”.
2. Continue. Now in “Proxy server”.
2a. In “Proxy server address” enter “217.195.32.11″.
2b. In “Realm” enter “pbxes.org”.
2c. In “User name” enter “yourPBXESusername-100″ (note. please don’t forget to put minus “-” between extension and username).
2d. In “Password” enter the password you created for your extension in our case it is “testing”.
2e. In “Allow loosing routing” select “Yes”.
2f. In Transport type choose “UDP”.
2g. In “Port” should be “5060″.
3. Now hit “Back” and goto fill “Registrar server”.
3a. In “Registrar server address” enter “217.195.32.11″.
3b. In “Realm” enter “pbxes.org”.
3c. In “User name” enter “yourPBXESusername-100″ (note. please don’t forget to put minus “-” between extension and username).
3d. In “Password” enter the password you created for your extension in our case it is “testing”.
3e. In Transport type choose “UDP”.
3f. In “Port” should be “5060″.
Now you almost done now quit and goto:
1. “Tools” -> “Settings” -> “Connection” -> “Internet tel. settings” -> hit options and choose “New profile”.
1a. In “Name” enter “pbxes”.
1b. In “SIP profiles” choose “pbxes”.
On the very right of your status bar on the phone you should see “phone icon with earth” to apear.
nokia e61 settings with broadvoice.pleace help 
Linear Mode
