[Zacharyx]

first off please forgive my typing it is 3am and i tyoe pretty bad anyway.
I am deployed to iraq and signed up for broadvoice and have been using the XTEN softphone. My roomate had a leadtek 8051 ATA sent and wants to use it with broadvoice. I have bo instruction and have never set up an ATA i deal with ciso phones often but they easy compared. itried to just transfer settings from the softphone to the ATA but since everything seems labeled different i am confused i am able to get into the GUI of the ATA so once i know what goes where i should be on my way. any help would be great and screen captures would be even better if possible thanks to all who have input

[PhoneBoy]

I've got a Leadtek ATA here and it's pretty trivial to configure with BroadVoice:

User Name: your #
Password: your password
Line 1 Phone Number: your #

Domain Name: sip.broadvoice.com
Line 1 Port: 5060
Server Address: proxy.dca.broadvoice.com (or whichever proxy works best for you)
Server Address Port: 5060
SIP Registration: Yes
Attempt DNS discovery first: Yes
Dial Plan: [2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|011xx.T|*xx|#xx
Enable STUN: No
Send Out-Of-Band Telephone Events: OOB_NONE

Supress Inband DTMF Audio: Yes
G723 On: No
G726 On: No
G729 On: No

[gbma5]

Does this dial plan work on 1800 number followed by additional dial selection? Another question, sometime you use a T (timer), sometimes you don't, could you tell me when I should attach a T to the end of a string?

[PhoneBoy]

Yes, this dial plan supports 800 numbers. The 'T' means wait for 4 seconds before sending the number. You kind of need that when you don't know/can't predict how many digits will be dialed.

If you can't do touch tones on an 800 number, the issue is likely the inband DTMF requirement for BroadVoice.