[yorktown48]

I have figured out the configuration for the D-Link DVG-G1402S wireless router for use with Broadvoice. Below are links to the router configuration settings.

Important note here: The DVG-G1402S is a wireless router and the config panel is NOT the same as the DVG-1402S router. The D-Link DVG-1402S is not wireless and the panel does not have as many advanced features for SIP as the DVG-G1402S router.

If you are buying the D-Link router...then get the DVG-G1402S and not the DVG-1402S router. (Make sure there are 2 G's in the part number or you will be sorry.

Configuration settings:

*********************
SERVER CONFIGURATION
*********************

SCREEN SHOT (TOP HALF)

SCREEN SHOT (BOTTOM HALF)


SIP Server
Server FQDN ====> ENABLED
IP Address ====> 0 .0 .0 .0
Domain Name ====> SIP.BROADVOICE.COM
Port ====> 5060
Secondary Server FQDN ====> DISABLED
Secondary IP Address ====> 0 .0 .0 .0
Secondary Domain Name ====>
Secondary Port ====> 5060
Outbound Proxy State ====> ENABLED
Outbound Proxy Sever FQDN ====> ENABLED
Outbound Proxy IP Address ====> 0 .0 .0 .0
Outbound Proxy Domain Name ====> proxy.atl.broadvoice.com
[i] use the city closest to you that broadvoice has a proxy
ex: proxy.nyc.broadvoice.com (New York City)
proxy.lax.broadvoice.com (Los Angeles)
proxy.bos.broadvoice.com (Boston)

Outbound Proxy Port ====> 5060
Use DNS-SRV ====> (CHECKED) Disabled

[top]> (UNCHECKED) Enabled
DNS-SRV Query Domain

>
Service Domain ====> sip.broadvoice.com
URL Format ====> SIP-URL
User Parameter Phone ====> DISABLED
Caller ID Delivery ====> YES
Display CID ====> ENABLED
Timer T2 ====> 4 sec

Initial Unregister
Register Expiration ====> 3600 sec
Session Expires ====> 1800 sec
Min-SE ====> 1800 sec
Session Expires Refresher ====> uac

Codec Priority & Packet Interval
G.711a-law ====> 3rd 20 ms
G.711u-law ====> 1st 20 ms
G.729a ====> 2nd 20 ms
G.726 ====> 4th 20 ms


*****************
XML Provisioning
*****************

SCREEN SHOT


Provisioning Function ====> DISABLED
Server URL ====>
Proxy Address ====>
Proxy Port Number ====> 8080

*******************
STUN Configuration
*******************

SCREEN SHOT

STUN State ====> DISABLED
STUN Server FQDN ====> DISABLED
STUN Server IP Address ====> 0 .0 .0 .0
Stun Server Name ====>
STUN Server Port ====> 3478
STUN ReqInterval ====> 60
STUN NAT Type UnKnown



Index SIP Message socket mapped ip/port SIP RTP socket mapped ip/port
1 0.0.0.0 : 0 0.0.0.0 : 0
2 0.0.0.0 : 0 0.0.0.0 : 0

***********
User Agent
***********
SCREEN SHOT


Same Phone Number ====> DISABLED
Index ====> 1
Phone Number ====> Your Broadvoice tel # (ex: 2125551212 )
Display Name ====>
User Agent Port ====> 5060
Authentication Username ====> Your Broadvoice tel # (ex: 2125551212 )
Password ====> Auth Password provided by Broadvoice (ex: CVffXxhhTT )
Retype Password ====> Auth Password provided by Broadvoice (ex: CVffXxhhTT )



**************
Peer to Peer
**************
SCREEN SHOT

Index 1
Phone Number
User IP Address ====> @ 0 .0 .0 .0
Port ====> 5060

SIP - Peer to Peer

Index Phone Number User IP Address Port Edit Delete
1 @ 0.0.0.0 5060
2 @ 0.0.0.0 5060
3 @ 0.0.0.0 5060
4 @ 0.0.0.0 5060
5 @ 0.0.0.0 5060
6 @ 0.0.0.0 5060
7 @ 0.0.0.0 5060
8 @ 0.0.0.0 5060
9 @ 0.0.0.0 5060
10 @ 0.0.0.0 5060

**********
Telephony
**********
SCREEN SHOT


Index ====> 1
DTMF Method ====> RFC2833
Payload Type ====> 101
VAD ====> ENABLED
Country Code ====> JAPANESE
Area Code Type ====> DISABLED
Area Code ====>

************
Speed Dial
************

SCREEN SHOT

Index 1
Dial Code
Phone Number

Speed Dial List

Index Dial Code Phone Number Edit Delete
1
2
3
4
5
6
7
8
9
10

*****************
MISC
*****************
SCREEN SHOT


*****************
Manage Features
*****************
SCREEN SHOT


(CHECKED) Reject Incoming Call
(UNCHECKED) Block Outgoing Call
Reject Incoming Call ensures that you aren't bothered by unwanted calls.
Reject Incoming Call Record 1

Name
PhoneNum
Status
Enabled
(CHECKED) Disabled



Status

Index Name PhoneNum Edit Delete
1
2
3
4
5
6
7
8
9
10

**************************
Supplementary Service
**************************
SCREEN SHOT

Service Activation Code Service Subscription

Value State
Cfwd All Act Code : ====> ENABLED
Cfwd All Deact Code : ====> ENABLED
Cfwd Busy Act Code : ====> ENABLED
Cfwd Busy Deact Code : ====> ENABLED
Cfwd No Ans Act Code : ====> ENABLED
Cfwd No Ans Deact Code : ====> ENABLED
CW Act Code : ====> ENABLED
CW Deact Code : ====> ENABLED
CW Per Call Act Code : ====> ENABLED
CW Per Call Deact Code : ====> ENABLED
Connect to VM Act Code : ====> ENABLED
Call Return Act Code : ====> ENABLED
DND Act Code : ====> ENABLED
DND Deact Code : ====> ENABLED
Block CID Act : ====> ENABLED
Block CID Deact Code : ====> ENABLED

[yorktown48]

One important thing to note:

Make sure that you are using the ORIGNAL firmware with the D-Link DVG-G1402S router:

version 1.00.011GNR is the original version

DO NOT upgrade the firmware to version 1.2. That version has all of the VOIP options removed and you will not be able to configure your VOIP.

[yorktown48]

If you have Firmware version 1.2 of the D-Link DVG-G1402S router, you can access the VOIP settings at:

http://192.168.15.1/admin

Be sure to include the '/admin' at the end as that will access the VOIP menu options.