Voxilla VoIP Forum

Go Back   Voxilla VoIP Forum > Service Provider Support Forums > BroadVoice Support Forum
Reload this Page 7940, updated to sip, dial tone, logo, but no calls
Register Blogs FAQ Members List Calendar Search Today's Posts Mark Forums Read

BroadVoice Support Forum Need help or have questions about BroadVoice? BroadVoice is here to answer your questions and concerns: technical support, how-to guides, troubleshooting, and general assistance.


Closed Thread
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old January 13th, 2007, 12:50 AM
Junior Member
  
Join Date: Jan 2007
Posts: 2
silasgtthomas is on a distinguished road
Question 7940, updated to sip, dial tone, logo, but no calls
Ok... so I got my Cisco 7940 updated to sip, I even got it to download the config from the Broadvoice TFTP server, even shows the broadvoice logo, I got dial tone, but I'm not getting incoming calls, and dialing out results in a busy signal.

Anyone got any ideas?

Any help is greatly appreciated!!!!

Thanks!
Silas
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
  #2 (permalink)  
Old January 26th, 2007, 01:37 AM
Junior Member
  
Join Date: Jan 2007
Posts: 1
portalsystems is on a distinguished road
Exclamation Re: 7940, updated to sip, dial tone, logo, but no calls
What version of the firmware are you using?

You have to use SIP 7.4 for Broadvoice to work.

I was having the same issue and then downgraded from 8.2 to 7.4 and it worked.

Hope this helps.

Dave
Portal Systems
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
  #3 (permalink)  
Old February 22nd, 2007, 02:43 PM
Junior Member
  
Join Date: Feb 2007
Posts: 1
tkanwar is on a distinguished road
Default Re: 7940, updated to sip, dial tone, logo, but no calls
I have the smae problem. It was working fine and am on P0S3-07-0-00. can anyone send me the SIP 7.5 version
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Closed Thread

« starcom f3000 | Can you share the full settings to SJphone »
Thread Tools
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
7960/7940 SIP IP phone prajothpj Other Hardware/Software 0 January 2nd, 2007 07:57 AM
SPA3102 - dial tone from Line1 but cannot calls not completing jturver Linksys (Sipura) VoIP Support Forum 1 December 14th, 2006 12:41 PM
UPDATED - UK PSTN Disconnect Tone Black20VT Linksys (Sipura) VoIP Support Forum 2 June 6th, 2006 08:06 PM
Cisco 7940 SIP not visible Erich.B Other Hardware/Software 0 March 3rd, 2006 09:20 AM
DIAL TONE OK BUT UNABLE TO MAKE PHONE CALLS Kukulut BroadVoice Support Forum 5 June 3rd, 2005 11:37 PM


Voxilla News

More Voxilla news


All times are GMT. The time now is 10:42 PM.

Contact Us - Voxilla.com - Archive - Privacy Statement - Top

vBulletin, Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc.
Logos and trademarks are the property of Voxilla or their respective owner. All other content © 2003-2009 by Voxilla, Inc.