Trixbox / vbuzzer incoming one way audio prblem

[torontob]

Hello everyone,
After lots of trial and error, finally I got vbuzzer working with Asterisk@Home (now known as trixbox).

My trixbox works with following settings:

Trunk Name = vbuzzer

PEER details:
allow=ulaw&alaw&gsm
authname=XXXXX
canreinvite=no
context=from-pstn
disallow=all
dtmf=rfc2833
dtmfmode=rfc2833
fromdomain=vbuzzer.com
fromuser=XXXXXX
hidecallerid=yes
host=vbuzzer.com
insecure=very
nat=no
port=80
qualify=yes
secret=YYYYY
type=peer
user=XXXXX
useragent=VBuzzer/1.1.1.2
username=XXXXX


USER Context = vbuzzer

User details:
authname=XXXXX
canreinvite=no
context=from-pstn
dtmfmode=inband
fromdomain=vbuzzer.com
fromuser=XXXXX
host=vbuzzer.com
insecure=very
nat=yes
port=80
secret=YYYYY
type=user
user=XXXXX
useragent=vbuzzer/1.1.1.0
username=XXXXX

Register String:
XXXXX:YYYYY:XXXXX@vbuzzer/XXXXX


My inbound routes are set to accept XXXXX DID (which is a username)

Both way audio on outgoig works fine. BUT, incoming calls can not hear me and I can hear them.

I have my asterisk server in DMZ and then a SIPURA 3000 attached to receive vbuzzer calls.

What could be the problem? any ideas?

Thanks in advance,
Bruce

[torontob]

Any ideas guys? I am sure someone has or had the same prob. Please share your info. Thanks

[osalmon]

Thanks for your above settings, they work on trixbox 1.1.1 exept for the fact that when I call the assigned vbuzzer number I cannot hear my trixbox greeting, however if I enter the desired extension it actually rings.

Any ideas?

[derrick]

same goes with mine...