Tribox@Home on non-standard port (SIP/RTP)

abcd_indya · #1 (**permalink**) August 1st, 2006, 08:33 PM

Hi,
Did anybody try configuring Tribox@Home (TH) on non-standard SIP and RTP ports ? I need to do this as there is a conflict with another SIP system on my LAN.
Basically it would like SIP on 6060 (will configured SIP clients accordingly) and RTP on 9000-10000 on TH. Any pointers would be appreciated. I tried changing SIP.conf and RTP.conf and restarting but apparently that doesn't help since it still keeps on looking for 5060.

md_27514 · #2 (**permalink**) August 1st, 2006, 10:13 PM

I would also like to hear solution.... But you have to realize that you can only change registration port of your sip devices, not your trunks. If for example Broadvoice want registration on port 5060, you have to forward this port to your asterisk, as all sip traffic between you and BV happens on this port. Remember also that asterisk does not have stun.
The only way around in my opinion would be to only use providers that use nonstandart sip port.