| Asterisk Support Forum Technical support, how-to guides, troubleshooting, and general assistance, from beginner to seasoned pro, this is where to discuss Asterisk, the most powerful open source PBX. |
 | | 
August 26th, 2004, 02:44 AM
| | Junior Member | | Join Date: Jul 2004 Location: Hollywood, CA - USA
Posts: 16
| |  SPA-3000 config for * and clarification on * config
Newbie here, I first got the SPA-3000 working with my VPConnect acct. via the auto config found here (that was very cool by the way). I then got * up and running and edited the * config files per the * and SPA-2000 How-to. No dialtone. I then edited the gateway in the SPA config to point to my * IP. No go.
Is there a beginner's How-to on how to get * and SPA-3000 going?
Thanks in advance to anybody who would like to lend a hand.
Cheers. |
August 26th, 2004, 03:52 AM
| | Junior Member | | Join Date: Jul 2004 Location: Hollywood, CA - USA
Posts: 16
| |
I also have a VPConnect DID and a POTS line, not sure how to configure.... The goal is to have 3 extensions, one to the FXS/ FXO port and 2 softphones, local uses POTS, LD uses VP or FWD. |
August 26th, 2004, 05:35 AM
| | Junior Member | | Join Date: Jul 2004 Location: Hollywood, CA - USA
Posts: 16
| |
I think I'll start getting * running without talking to the SPA-3000 first and then I'll introduce * via a call plan (like I know wtf I'm talking about!...and yes I like talking to myself ) :mrgreen: |
August 26th, 2004, 06:57 AM
|  | Senior Member | | Join Date: Sep 2003 Location: Port Orchard, WA
Posts: 3,295
| |
This thread is a sticky on the SPA forums and answers your question hopefully. http://voxilla.com/forum-viewtopic-t-557.html
__________________
Technical questions should be posted to the forums, not sent via PM to me. |
August 26th, 2004, 05:10 PM
| | Junior Member | | Join Date: Jul 2004 Location: Hollywood, CA - USA
Posts: 16
| |
Thanks PhoneBoy, yes I noticed that. I'll work on getting * running first and give that a try. |
September 14th, 2004, 09:25 PM
| | Junior Member | | Join Date: Sep 2004
Posts: 5
| |
PhoneBoy,
I have tried, unsuccessfully, to get an SPA 3000 to work with Asterisk. I have fought with the thread you gave and cannot seem to get anything to register correctly. I'm running the 2.0.10d firmware. I am unclear on where I should be putting username and secret information in the 3000 configuration.
Does anyone have clear instructions on Asterisk and SPA 3000 setup? Quote: |
Originally Posted by PhoneBoy | |
September 15th, 2004, 05:51 AM
| | Senior Member | | Join Date: Apr 2004 Location: Amsterdam, Netherlands
Posts: 345
| |
I have PM'd you with a snapshot of my config with Sipura and an Asterisk instance. Let me know if you have any questions back here in the thread. |
September 15th, 2004, 09:37 PM
| | Junior Member | | Join Date: Sep 2004
Posts: 5
| |
It works! Thanks to your help and that of bernart, I have the unit interacting with Asterisk. I know incoming calls work at least.
Now is it possible to set it up so the line isn't answered until someone picks up on Line 1 or I want Asterisk to audibly interact with the caller? This would be nice to reduce unwanted charges for the caller. Quote: |
Originally Posted by muppetmaster I have PM'd you with a snapshot of my config with Sipura and an Asterisk instance. Let me know if you have any questions back here in the thread. | |
September 15th, 2004, 09:55 PM
| | Junior Member | | Join Date: Aug 2004
Posts: 20
| |
Can someone please PM me a snapshot as well? I am having the same problem getting * and SPA-3000 to work together. Thanks a lot in advance. |
September 17th, 2004, 12:48 AM
| | Senior Member | | Join Date: Sep 2003 Location: Port Orchard, WA
Posts: 3,295
| |
We need a good doc on the SPA-3000 and Asterisk. Wanna take a shot, Muppetmaster?
__________________
Technical questions should be posted to the forums, not sent via PM to me. | | |
| Thread Tools | | | | Display Modes | Rate This Thread |  Linear Mode | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|
