setup question Asterisk Now + Openvox A400P

[vegastech]

Hello,

I've been using the Cisco/Linksys Voice System for awhile but would now like to setup an Asterisk box. My current setup is Asterisk Now v1.5 (upgraded to the current modules), an Openvox A400P card w/4FXO to convert my POTS to voip, and SPA942 phones. I've created extensions in Asterisk Now and can dial between the phones.

My main question is how do I configure the A400P in Asterisk Now? I've been reading the forums and I'm starting to grasp it but still having some issues. I've created a trunk (g0) in Asterisk Now but don't know how to bind the configed trunk to the hardware. The trunk is setup as dahdi (zaptel compatible). If I run the dahdi status/show in the CLI I see the hardware. I've found some references to the conf file do I need to edit that manually or does Asterisk Now perform the configuration?

[vegastech]

Can anyone give me a big picture process? So far I am thinking:

Asterisk Now
1. intra-service/local network
1.1 create extensions
1.2 config phones

2. inter-service/external calling
2.1 define channel
2.2 config trunk
2.3 define outbound routes

[liuxin]

hi
plese contact me
my email: xin.liu@openvox.cn