[krumfrum]

I'm rather new to AAH 2.8 and need a little help...

I've got 2 PSTN lines and a variety of VoIP lines that I use for outbound calling. All are set up with proper outbound routes to cover US 7-,10-,and 11-digit dialing, as well as toll-free. I use Voipstunt (one of the Finarea companies) as one of my SIP trunks, and they require all calls to start with 00 (instead of 011) for international calling. I do have a dial plan for adding the 00 to the US phone calls that I make.

Can anyone help me put together applicable rules, both for the trunk and for an outbound route, that take calls dialed 011+country code, etc. and dial them on the Voipstunt trunk as 00+country code, and, if that trunk is unavailable, dial them as 011+country code on the other trunks I have?

Thanks!

[gremln007]

Originally Posted by krumfrum

I'm rather new to AAH 2.8 and need a little help...

Can anyone help me put together applicable rules, both for the trunk and for an outbound route, that take calls dialed 011+country code, etc. and dial them on the Voipstunt trunk as 00+country code, and, if that trunk is unavailable, dial them as 011+country code on the other trunks I have?

Thanks!

I can help with the first half of your question. In the trunk setup, I have the following:

Dial Rules:

1+NXXNXXXXXX
1504+NXXXXXX
011|.

Outbound Dial Prefix:

00

Hope this helps